Kikusui TOS9200, Operation Manual

Page: 102 / 172

3-64 Basic Operations TOS9200/9201
3.12.1 Storage in the panel memory
• T o store data, fi rst specify a memory number , follo wed by a memory name. T o
return to the pre vious name, mo v e the cursor to the memory number after setting
the memory name.
Storing the results of an A C withstanding v oltage test in panel memory (e xample)
1. Press the A CW k e y to displa y the A C withstanding v oltage test screen
(A CW1), and set the test conditions .
2. Press the SHIFT + RECALL/ST ORE k e ys to displa y “ST O 00 :--UNTI -
TL TED--” to the r ight of the title .
3. Using the rotar y knob , set a memor y n umber (00 to 99).
4. Using the k e y , mo v e the cursor to “--UNTITL TED--. ”
5. Using the rotar y knob , enter a memor y name (using up to 12 char ac -
ters). Use ASCII-code char acters from 20H through 7EH (see the
Appendix).
6. Press the ENTER k e y to store the test conditions under the set memor y
number.
Upon completion of the storage procedure, “STO” changes to “MEM.”
To cancel the storage operation, move the cursor to any location on the display
before pressing the ENTER key.
3.12.2 Recalling panel memory
1. Press the RECALL key to display “RCL Memory No.: Memory Name” to
the right of the title.
2. Using the rotary knob, specify the memory number to be recalled (00 to
99).
NOTE
VOLT LOWER UPPER TIMER
2.50
kV
10.0
mA
3.0
s
ACW1 ACW1
FREQ LOWER OFF OFFSET OFF TIMER OFF
UPPER
60Hz
STO
05 : ACW-TEST5
VOLT LOWER UPPER TIMER
5.00
kV
10.0
mA
5.0
s
ACW1 ACW1
FREQ LOWER OFF OFFSET OFF TIMER OFF
UPPER
60Hz
RCL
99 : ACW-TEST99