Kikusui TOS9200, Operation Manual

Page: 139 / 172

TOS9200/9201 Part names and Functions 6-3
• IR
When this LED is pressed, the LED lights up. The LCD displays the insulation
resistance testing screen (IR).
• SYSTEM /I/F
When this key is pressed, the LED lights up. The LCD displays the system
settings screen (SYSTEM).
To display the interface settings screen (INTERFACE), press this key together
with the SHIFT key.
[7] MEMORY
• AUTO/EDIT
When this key is pressed, the LED lights up. The LCD displays the program
execution screen (AUTO READY).
To display the program edit screen (AUTO EDIT), press this key together with
the SHIFT key.
• RECALL/STORE
Used to recall the panel memory.
To change the memory number,
fi rst press the rotary knob, then press the
ENTER key next to the rotary knob to recall the contents.
To store data in memory, press this key together with the SHIFT key.
[8] LCD
Displays settings and measurements.
[9] Analog voltmeter
Voltmeter used to display the output voltage. Directly reads the voltage between the
HIGH VOLTAGE terminal and the LOW terminal.
•
While the pointer of the analog voltmeter is moving, never touch the HIGH
VOLTAGE terminal, test leadwire, or DUT.
•
This voltmeter cannot be used as an independent voltmeter. It may mal-
function if a voltage is applied to the output terminal from outside.
[10] Analog-voltmeter zero adjuster
Adjuster used to adjust the analog voltmeter to the zero point.
• Prior to zero adjustment, be sure to turn off the POWER switch.
WARNING
CAUTION
CAUTION