Kikusui TOS9200, Operation Manual

Page: 155 / 172

TOS9200/9201 Specifications 8-7
Item Speci fi cations (TOS9200/TOS9201)
Judgement function
Judgement method/action
Judge-
ment
Judgement method Display Buzzer SIGNAL I/O
UPPER
FAIL When the tester detects a resistance exceed-
ing the upper resistance, it cuts off the out-
put and makes an UPPER FAIL judgement.
However, no judgement is made during a
voltage rise time (RISE TIME). The FAIL
LED lights up.
Displayed on
the LCD ON Outputs the U
FAIL signal
LOWER
FAIL When the tester detects a resistance below
the lower resistance, it cuts off the output
and makes a LOWER FAIL judgement.
However, no judgement is made until the
judgement wait time (WAIT TIME) has
elapsed. The FAIL
LED lights up.
Displayed on
the LCD ON Outputs the L
FAIL signal
PASS When the preset time has elapsed without
any abnormalities, the tester cuts off the out-
put and makes a PASS judgement. The PASS
LED lights up.
Displayed on
the LCD ON Outputs the
PASS signal
• The PASS signal is output at the timing preset on PASS HOLD. If HOLD is set, the PASS signal
is output continuously until the STOP signal is input.
• The UPPER FAIL signal and the LOWER FAIL signal are output continuously until the STOP
signal is input.
• The FAIL and PASS buzzer volumes are adjustable. However, they cannot be adjusted individu-
ally, as they are set in common.
Setting range for the upper
resistance (UPPER) 0.01 M Ω to 9.99 G Ω
[Below the maximum rated current]
Setting range for the lower
resistance (LOWER) 0.01 M Ω to 9.99 G Ω
[Below the maximum rated current]
Judgement accuracy
For both UPPER and
LOWER
Judgement current
50 nA
≤
i
≤
100 nA
100 nA < i
≤
200 nA
200nA < i
≤
1
μ
A
1
μ
A < i
≤
1 mA
UPPER,
LOWER
0.01 M
Ω ≤
R
< 10.0 M
Ω
––
––
––
± (2 % of set
-
ting + 3digit)
10.0 M
Ω ≤
R
< 50.0 M
Ω
± (5 % of set
-
ting + 5digit)
50.0 M
Ω ≤
R
< 100 M
Ω
100 M
Ω ≤
R
< 200 M
Ω
± (10 % of set
-
ting + 5digit)
200 M
Ω ≤
R
< 500 M
Ω
± (20 % of set
-
ting + 5digit)
500 M
Ω ≤
R
< 1.00 G
Ω
1.00 G
Ω ≤
R
< 2.00 G
Ω
± (20 % of set
-
ting + 10digit)
– –
2.00 G
Ω ≤
R
< 5.00 G
Ω
± (20 % of set
-
ting + 20digit)
± (10 % of set
-
ting + 10digit)
5.00 G
Ω ≤
R
< 10.0 G
Ω
– –
Judgement current = test v oltage/(UPPER,LO WER)
[In the humidity range of 20 % to 70 % R.H (no condensation), with no disturbance such
as swinging of the test leadwire]
[In LO WER judgement, at least 0.5 s is necessary for testing after the W AIT TIME has
elapsed. In LO WER judgement for 200 nA or lo wer , a w ait time of at least 1.0 s is neces -
sary .]