Kikusui TOS9200, Operation Manual

Page: 99 / 172

TOS9200/9201 Basic Operations 3-61
3.11 Interface Settings
To display the interface setting screen (INTERFACE), press the SHIFT + SYSTEM/
I/F keys. The SYSTEM/I/F key lights up.
• When interfaces have been changed, turn the power off and on again to con fi rm
the new settings.
The interface setting screen permits the following settings to be made:
1. GPIB address
2. Baud rate of the RS-232C interface
3. Data length of the RS-232C interface
4. Parity of the RS-232C interface
5. Stop bit of the RS-232C interface
Setting the GPIB address
Set the GPIB address to 0 through 30.
1. Using the F1 key (GPIB) or the keys, move the cursor to GPIB
ADDRESS.
2. Using the rotary knob, set the GPIB address.
Setting the baud rate of the RS-232C interface
For the baud rate of the RS-232C interface, select one of the following three speeds:
38 400 bps
19 200 bps
9 600 bps
1. Using the F2 key (SPEED) or the keys, move the cursor to
SPEED.
2. Using the rotary knob, select 38,400, 19,200, or 9,600.
NOTE
GPIB SPEED DATA PARITY STOP
INTERFACE INTERFACE
GPIB ADDRESS : 3
SPEED : 19200 PARITY : NONE
DATA : 8bit STOP : 2bit
F1 F2 F3 F4 F5