Kikusui TOS9200, Operation Manual

Page: 140 / 172

6-4 Part names and Functions TOS9200/9201
[11] DANGER lamp
Red lamp indicating that a high voltage is being output.
This lamp lights up during testing and automatic testing, or while an output voltage
remains in the output terminal.
•
While this lamp is lit, never touch the HIGH VOLTAGE terminal, test lead-
wire, or DUT.
[12] LOW/GUARD
Lights when the LOW/GUARD for the GND is set to LOW for each test.
• When this lamp is off, check the grounding of the DUT, jigs and peripheral
devices. Read the relevant sections of "Chapter 3 Basic Operations", and
strictly follow the instructions given.
[13] LOW terminal
Low-voltage terminal for outputting the test voltage.
[14] HIGH VOLTAGE terminal
High-voltage terminal for outputting the test voltage. The test voltage is output
between this terminal and the LOW terminal.
•
During a test, never touch the HIGH VOLTAGE terminal.
• Internal circuit may malfunction if a voltage is applied to it from outside.
[15] REMOTE terminal
Terminal used to connect the optional remote-control box or the exclusive probe.
[16] F1 to F5
Functions corresponding to the F1 to F5 keys on the LCD.
[17] SHIFT
Used to switch the function menus and expand key functions.
When the POWER switch is turned on while this key is pressed, the tester settings
are initialized (returns to the default settings). For details, see "3.17 Initialization".
WARNING
WARNING
WARNING
CAUTION