Kikusui TOS9200, Operation Manual

Page: 3 / 172

TOS9200/9201 I
TOS9200
AC WITHSTANDING VOLTAGE /
INSULATION RESISTANCE TESTER
Ver. 1.01
KIKUSUI ELECTRONICS CORP.
TOS9201
AC/DC WITHSTANDING VOLTAGE /
INSULATION RESISTANCE TESTER
Ver. 1.01
KIKUSUI ELECTRONICS CORP.
Interlock Function
The first time the tester is turned on following delivery, the interlock
function activates and testing is disabled.
Before starting a test, read "4.3 INTERLOCK Connector" for the
procedure for starting up the tester using the interlock function.
About this manual
This operation manual describes the withstanding voltage tester
TOS9200/TOS9201.
This manual is applicable to the Tester whose ROM version
number is:
Ver. 1.
3
X for TOS9200
Ver. 1.
3
X for TOS9201
You can check the version number on the opening screen at turning on the power
or by using the *IDN? message.
For the *IDN? message, see the separate volume "GPIB, RS-232C interface"
operation manual.
When you contact us for any information about the Tester, please indicate
the ROM version number and serial number of the Tester. The serial number
is shown on the rear panel of the Tester.
The opening screen (Example of ROM version is 1.01)