KEB COMBIVERT F5-A, Applications Manual, Page: 112 / 552

Page 7.2 - 16 COMBIVERT F5-A, -E, -H © KEB, 2012-10
Analog in- and outputs
Analog output as switch
An example for using the analog output as 0/10V switch is shown in picture 7.2.13.c
1. adjustment of the gain (An.33) to 20.00
2. adjustment of the X-Offset (An.34) to the desired switching level
Picture 7.2.13.c Analog output as switch
10V
100% -100%
-100%
An.34
100%
An.33
Because of the high amplification the analog output
switches in a relative small switching window.
Computation of the amplification
Since the analog output always works firmly onto the values defined in 7.2.12, one can adjust the characteristic
with the aid of the amplification that the complete range 0...±10V is used.
defined value
–––––––––––––––
desired value
= Amplification (
An.33/ 38/ 43/ 49)
Example output frequency (not valid for F5-M):
100Hz
–––––
68Hz
= 1,47
7.2.14 ANOUT 1...4 Digital setting (An.32 / 37 / 42 / 48)
Analog values can be preset in percent for the respective input with parameters An.32/ An.37/ An.42/ An.48.
For that purpose value 8: „digital setting“ must be adjusted as process variable. The setting is done within the
range ±100 %.