KAESER KOMPRESSOREN SIGMA CONTROL 2, User Manual

Page: 184 / 246

2. Use «Up »or «Down» to set the
AII input.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.2.4 Network actual pressure
Menu
AII 6.1bar
Active line (external pressure transducer)
AII1.01 ☐ 0.0bar
For sensor error:
Alarm
3. Press «Enter».
The
AII input is set.
4. Press «Down».
The line for activating the input is displayed.
5. Press the «Right» key.
6. Press «Enter».
The check box assigned to the input flashes.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.2.4 Network actual pressure
Menu
AII 6.1bar
Active line
AII1.01 ok ☑ 0.0bar
For sensor error:
Alarm
7. Press «UP».
The check box is activated.
ok is displayed.
8. Press «Enter».
The setting is applied.
Result The input for the external transducer is now activated.
8.16 Commissioning the machine
Checking the controller settings Chapter Confirmed?
➤ Language correctly set? 8.2.2
➤ Date and time correct? 8.2.8
➤ Display format correctly set? 8.2.10
➤ System pressure setpoint correctly set? 8.5
Tab. 81 Check list for starting the machine
8 Initial Start-up
8.16 Commissioning the machine
174
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E