Secure storage of RFID Equipment Cards
2 RFID Equipment Cards are supplied with each machine.
They are stored in a plastic sleeve.
The plastic sleeve is attached to the rear of the controller inside the control cabinet.
In the event that both RFID Equipment Cards are lost, you can only register a new RFID Equip‐
ment Card by entering a user name and password. Should the user name and password also be
lost, a new RFID Equipment Card may be registered via an authorised service partner. There will
be a charge for this service.
5.5 KAESER CONNECT
Using an Internet-capable device with web browser, you can access a visualisation of the control‐
ler. This enables, for example, the operating and energy efficiency of your machine to be checked
remotely. To do so, you must generate a one-time password (see Chapter 8.2.5). KAESER
CONNECT does not require additional software for this purpose. The display language for
KAESER CONNECT can be set independently of the language used in the SIGMA CONTROL 2.
Fig. 11 KAESER CONNECT for SIGMA CONTROL 2
KAESER CONNECT functions:
Operating element Meaning
read => write
Switches from read-only to write mode
To create users and acknowledge messages
write => read
Switch from write to read-only mode
Logout
Log the user out
Contact/Service
Display contact information for KAESER Global Service Support
12)
not on SXC
5
Design and Function
5.5
KAESER CONNECT
28
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E
