Juniper QFX10016, Hardware Manual

Page: 85 / 439

Table 26: Power Input and Output Voltages for JNP10K-PWR-DC2 Power Supplies
(Continued)
INP0 (Switch 1) INP1 (Switch 2) H/L (High Input 80 A/Low Input 60A) Output Power
Off On Off (60 A) 2200 W
Figure 35: JNP10K-PWR-DC2 Power Supply
CAUTION: Do not mix power supply models in the same chassis in a running
environment. JNP10K-PWR-DC and JNP10K-PWR-DC2 can coexist in the same
chassis during power supply upgrades.
WARNING: The router is pluggable type A equipment installed in a restricted-access
location. It has a separate protective earthing terminal on the chassis that must be
connected to earth ground permanently to ground the chassis adequately and protect
the operator from electrical hazards.
CAUTION: Before you begin installing the router, ensure that a licensed electrician has
attached an appropriate grounding lug to the grounding cable that you supply. Using a
grounding cable with an incorrectly attached lug can damage the router.
74