Juniper QFX10016, Hardware Manual

Page: 207 / 439

1. Move the shipping box to a staging area as close to the installation site as possible. While the
chassis is bolted to the pallet, you can use a forklift or pallet jack to move it. Make sure there is
enough space to remove components from the chassis.
2. Position the shipping box with the arrows pointing up.
3. Using the box cutter, slice the nylon straps that hold the shipping boxes to the pallet.
4. Lift the shipping box off the chassis.
5. Remove the cardboard accessory box.
6. Remove the foam padding from the top of the box.
7. Remove the plastic cover from the switch chassis.
8. Use a 13/32 in. (10 mm) open-end or socket wrench to remove the four sets of bracket bolts that
secure the chassis to the shipping pallet (see
Figure 72 on page 196 ).
Figure 72: Bracket Bolt Removal
9. Unpack the accessory box and lay out the contents so that they are ready for use.
196