Juniper QFX10016, Hardware Manual

Page: 340 / 439

1. Attach the ESD grounding strap to your bare wrist, and connect the strap to the ESD point on the
front of the chassis. There is an ESD point located above the status LED panel on the right side (see
Figure 177 on page 329 and Figure 178 on page 329 ).
Figure 177: ESD Point on QFX10008 Chassis Front
Figure 178: ESD Point on QFX10016 Chassis Front
1
—
ESD point
2. Loosen the two captive screws to remove the cover on the RCB by using the Phillips (+) screwdriver,
number 1 (see Figure 179 on page 329 ).
Figure 179: Removing the SATA SSD Cover
3. Remove the SATA SSD from the electrostatic bag, taking care not to touch the connectors.
329