Juniper QFX10016, Hardware Manual

Page: 119 / 439

6XQSFP cage are available to channelize a port range (see Figure 56 on page 108 ). The port range must
be configured using the set chassis fpc pic port channel-speed command. For example, to channelize the
first switch port, use the set chassis fpc
0 pic 0port 1channel-speed 10g
command.
Figure 56: Use the First and Fourth Port in Each 6XQSFP Cage to Channelize a Port Range
Table 45 on page 108 shows the available combinations for the ports. Most 100-Gigabit Ethernet
transceiver ports are used as uplinks.On the QFX10000-36Q, the ports are enabled by default, and the
default configuration adds the ports to the default VLAN.
Table 45: QFX10000-36Q Port Mapping
Port Number 4X10-Gigabit
Ethernet 4X10-Gigabit
Channelized
Port Group 40-Gigabit
Ethernet 100-Gigabit
Ethernet 100-Gigabit Ethernet
Disables
0
✓ ✓ ✓
– –
1
✓ ✓ ✓
0, 2
2
✓ ✓
– –
3
✓ ✓ ✓
– –
4
✓ ✓
– –
5
✓ ✓ ✓
3, 4
108