Juniper QFX10016, Hardware Manual

Page: 310 / 439

terminal and below PSU 5 on the QFX10008 rear panel (see Figure 148 on page 299 and below
PSU_9 on the QFX10016 (see Figure 149 on page 299 ).
Figure 148: ESD Point on QFX10008 Chassis Rear
1
—
ESD point
Figure 149: ESD Point on QFX10016 Chassis Rear
1
—
ESD point
2. Make sure that the voltage across the DC power source cables leads is 0 V and that there is no
chance that the cables might become active during the removal process.
3. Ensure the black power supply output switch, to the right of the captive screw, is set to the standby
position.
4. Unscrew the captive screw counterclockwise by using your fingers or by using the
Phillips (+) screwdriver, number 1.
299