Juniper QFX10016, Hardware Manual

Page: 236 / 439

2. Connect the other end of the Ethernet cable to the console server (see Figure 89 on page 225 ) or
management console (see Figure 90 on page 225 ).
Figure 89: Connect a Device to a Management Console Through a Console Server
Figure 90: Connect a Device Directly to a Management Console
RELATED DOCUMENTATION
QFX10000 Console and Management Cable Specifications and Pinouts
Performing an Initial Configuration of a QFX10000
Before you begin connecting and configuring the switch, set the following parameter values on the
console server or PC:
• Baud Rate—9600
• Flow Control—None
• Data—8
• Parity—None
• Stop Bits—1
225