Juniper QFX10016, Hardware Manual

Page: 344 / 439

6. Using the handles, slide the line card halfway out of the chassis.
CAUTION: Do not stack line cards on top of one another or on top of any other
component. Place each line card separately in the electrostatic bag or on the antistatic
mat placed on a flat, stable surface.
CAUTION: Each QFX10000 line card weighs between 20.9 lb (9.5 kg) and 27.3 lb
(12.4 kg). Be prepared to support the full weight as you slide the line card out of the
chassis.
7. Grasp both sides of line card at midpoint and remove the line card from the chassis. Either have
someone assist you in putting the line card into the electrostatic bag or rest the card on the antistatic
mat. Take care not to bump or store the line cards on the connectors. See
Figure 184 on page 333 .
Figure 184: QFX10000 Line Card Connectors
1
—
Connectors
8. If you are not installing a line card in the emptied line card slot within a short time, install a cover over
the slot. Do this to protect the interior of the chassis from dust or other foreign substances and to
ensure that the airflow inside the chassis is not disrupted.
SEE ALSO
QFX10000 Line Cards
333