Juniper QFX10016, Hardware Manual

Page: 347 / 439

which would prevent the line cards from being properly seated in the chassis. See
Figure 188 on page 336 .
Figure 188: Line Card Connectors
1
—
Connectors
3. Remove the line card from the electrostatic bag and inspect it for any damage before installing it into
the chassis.
4. Grasp and lift the line card by the sides.
5. Slide the line card all the way into the slot until the handle holes align. See Figure 189 on page 336 .
Figure 189: Inserting a Line Card into the Slot and Rotating the Handles
6. Screw the line card into the chassis by rotating the handles until the card is fully seated and the
handles are vertical.
336