Juniper QFX10016, Hardware Manual

Page: 319 / 439

11. If the power supply slot on the chassis has a cover panel on it, insert your thumb and forefinger into
the finger holes, squeeze, and pull the cover out of the slot. Save the cover panel for later use (see
Figure 156 on page 308 and Figure 157 on page 308 ).
Figure 156: Removing the Power Supply Cover Panel on a QFX10008
Figure 157: Removing the Power Supply Cover Panel on a QFX10016
12. Unscrew the captive screw in the counterclockwise direction by using your fingers or by using the
Phillips (+) screwdriver, number 1.
13. Rotate the captive screw away from the faceplate of the power supply to release the latch.
308