Juniper QFX10016, Hardware Manual

Page: 332 / 439

To install a SIB:
1. Place an electrostatic bag or an antistatic mat on a flat, stable surface.
2. Attach the ESD grounding strap to your bare wrist, and connect the strap to the ESD point on the
chassis. There is an ESD point located next to the protective earthing terminal and below PSU 5 on
the QFX10008 rear panel (see
Figure 169 on page 321 ) and below PSU_9 on the QFX10016 rear
panel (see Figure 170 on page 321 ).
Figure 169: ESD Point on QFX10008 Chassis Rear
1
—
ESD point
Figure 170: ESD Point on QFX10016 Chassis Rear
3. Remove the appropriate fan tray (see
Removing a QFX10008 Fan Tray
).
321