JUKI DLN-6390, Instruction Manual, Page: 65 / 380

ENGLISH
!
. SPECI�ICATI�NS
DLN�6390�7 DLN�6390
Applcaton Bottom hemmng, wast band attachng (locksttch type), hemmng (locksttch type)
Max. sewng speed
When sttch length s less than 3.6 mm : 5,000 st/mn
When sttch length s not less than 3.6 mm : 4,500 st/mn
Sttch length *1 2.
*
mm, 2.3 mm, 2.5
*
mm, 2.8 mm, 3.2 mm (standard), 3.6 mm, 4.2
*
mm
*
: Optonal
Needle
SCHMETZ UY80GVS Nm40 (shank dameter φ .84)
Range of use : Nm90 to #50 (equvalent to #4 to #22.5)
Needle bar stroke 35 mm
Thread take-up stroke 23 mm
Hook Exclusve automatc lubrcatng full-rotary .7 fold hook
Lft of presser foot
(Between upper feed roller and lower roller) Presser lftng lever : 4.5 mm
Auto-lfter : 3 mm (Max. 4 mm) Knee lfter (by manual) : 3 mm (Max.4 mm)
Feed method Upper/lower roller contnuous feed method
Hemmng bnder open/close method Ar cylnder drve By manual
Lubrcatng ol
JUKI NEW DEFRIX OIL No.
or JUKI MACHINE OIL #7
Sttch length adjustng method Gear replacement method
Needle clamp method Nut clamp method
Motor SC-92/M5N 400W or hgher power clutch motor can be used.
Nose
- Equvalent contnuous emsson sound pressure level (L
pA
) at the workstaton :
A-weghted value of 80.0 dB; (Includes K
pA
= 2.5 dB); accordng to ISO 082- C.6.2
-ISO 204 GR2 at 5,000 st/mn.
*1. Do not set the scale of feed dial to change the needle feed amount to 2.1 or less.