J.A. Woollam M-2000, Hardware Manual

Page: 95 / 178

M-2000® Hardware Manual ©2023 J.A. Woollam Co. 95
Creating New Acquisition Parameters
To create new Acquisition Parameters, select “Create/Edit Recipe” (shown in
Figure 5-7), then “Edit/Create” next to each recipe component in the
Recipe
panel to open the setup window.
Figure 5-11. Edit/Create Recipe.
Use the ‘Save’ button near the bottom of the screen after entering desired
measurement parameters. Saved Acquisition Parameters will now be available
for <Prompt for Recipe Components> or creating a new Recipe.
Figure 5-12. Save Parameters (example).
Creating New Analysis Models
This is discussed in detail in the CompleteEASE Data Analysis Manual. View the
CompleteEASE Data Analysis Manual by selecting:
Options > Miscellaneous >‘Show Manual’ (or Press F1)
Using a Recipe
1. To measure and analyze a sample using a Recipe, select the desired
Recipe from:
Measurement > Measurement Controls >Recipe: