40
©2023 J.A. Woollam Co.
M-2000® Hardware Manual
AC Wiring (for System Enclosure Option)
Caution: When installing equipment, ensure that access to all E-Stop (EMO)
buttons is unimpeded. In case of emergency, pressing the button
will de-energize the equipment and put it in a safe state.
1.
Ensure all components are turned off before attaching the AC power
cord.
2.
Attach a power cord protected by a 15 Amp breaker to the Power Control
Module by routing through the ‘Power Feed-thru’ port. This power cord
may not be supplied and must have an IEC-320 C-13 plug on one end.
The cord must be rated for at least 12A continuous.
Figure 3-32. Enclosure back panel connections.
3.
Attach the other end of the AC power cord to the appropriately labeled
jack on the surge suppressor.
4.
Attach surge suppressor to the AC power outlet and ensure it is switched
ON.
Figure 3-33. 110V AC Configuration.
USB
NETWORK
POWER
FEED-THRU
POWER ENTRY
Power Control Module
Summary of Contents for M-2000
