J.A. Woollam M-2000, Hardware Manual

Page: 96 / 178

96 ©2023 J.A. Woollam Co. M-2000® Hardware Manual
Figure 5-13. Example Recipe.
2. After Recipe is selected, simply click ‘Measure’. The measurement
sequence will proceed normally, starting with sample alignment (unless
‘Skip’ is selected in the Data Acquisition Parameters).
3. After the measurement is completed, the data will be analyzed using the
Model contained in the Recipe. Notice that Model fit results are now
displayed in
Measurement > Fit Results panel.
Figure 5-14. Example data after measurement with Recipe.
4. To view the Model used, switch to the Analysis tab. Note that the
Analysis > Data panel indicates the data filename given, or if the data has
not yet been saved.