J.A. Woollam M-2000, Hardware Manual

Page: 12 / 178

12 ©2023 J.A. Woollam Co. M-2000® Hardware Manual
Figure 1-1. Potential pinch points.

Ensure all system controls and power cables are tied/tucked
away/hidden/kept away/arranged such that persons walking around the
instrument area will not snag or trip on any of the cables.

Replace bad fuses only with proper type and rated fuse.

Never look into a tip of an optical fiber.

Never look directly at an operating lamp, severe eye injury may result.
Wear UV protective lenses, such as a welder’s helmet, when working
around operating lamps.

Permanent eye damage can result from looking directly into the beam. It
is best to view the beam using a piece of paper or business card.

Before servicing this equipment, ensure that the power source is
disconnected.

Before servicing the lamp housing, be sure to disconnect all cables. Make
certain the lamp is at room temperature (turn lamp off for at least 20
minutes).

Compact arc lamps contain highly pressurized gas, and present an
explosion hazard even when cold. Wear face protection, such as a full-
face shield, gloves and a long sleeve shirt whenever handling lamps.
1.3 Environmental Operating
Range

Temperature: 10°C to 35°C

Humidity: 20% to 80% (non-condensing)