M-2000® Hardware Manual
©2023 J.A. Woollam Co.
127
Note:
The objective lens is fixed, but the digital zoom may be used if
desired.
Figure 8-4. Set Beam Position window.
a.
Standard Camera.
If necessary,
tilt
the standard camera to center
the beam on the screen. Use the diagonal adjustment screws of
the camera tilt stage, shown in Figure 8-5. If the camera image is
not in focus, adjust the Z height of the camera by turning each
adjustment screw on the tilt stage by the same amount.
Figure 8-5. Standard Camera adjustment.
Turn all (3) adjustment
screws by the same
amount in the same
direction to move the
camera in the Z
direction
.
Summary of Contents for M-2000
