J.A. Woollam M-2000, Hardware Manual

Page: 105 / 178

M-2000® Hardware Manual ©2023 J.A. Woollam Co. 105
Figure 6-3. Install Focus Probes.
2. Select Yes when prompted to step through the alignment procedure. The
system will raise the Z stage and move to the straight-through position
(90°).
Figure 6-4. Probe alignment message box.
3. Each probe is labeled as Source or Receiver. CompleteEASE will prompt
for attaching each probe. This procedure may vary if the Alignment
Camera is present in the Receiver Unit.
Standard Receiver Unit
1. The first prompt is to attach the Receiver probe. Using the three captive
thumb screws, attach the Receiver focusing probe to the Receiver probe
tilt stage.
Figure 6-5. Adjust Receiver probe.