J.A. Woollam M-2000, Hardware Manual

Page: 125 / 178

M-2000® Hardware Manual ©2023 J.A. Woollam Co. 125
8 Sample Camera
This chapter pertains to an optional accessory that may or may not have been
purchased with your instrument. There are two types of imaging cameras
covered in this Chapter. Each of which has different capabilities and alignment
procedures.
Note: Instructions in this chapter are assuming focusing lenses are
attached in order to view the measurement beam on the sample.
Figure 8-1. Standard Camera example (may vary based on model).
Illumination Control
There are (2) types of illumination on the Standard Camera – “Ring” and “In-
Line.” These can be used to view the sample image using the camera.

Ring Illumination – useful for non-reflective (rough) surfaces.

In-Line Illumination – useful for reflective (“mirror-like”) surfaces.
USB Camera
Camera Tilt Stage
In-line Illumination
Objective Lens
Ring Illumination
Illumination Control