J.A. Woollam M-2000, Hardware Manual

Page: 118 / 178

118 ©2023 J.A. Woollam Co. M-2000® Hardware Manual
Figure 7-7. Add Point.
As points are added, representative dots will appear in the diagram. Click on a
specific point in the point list to select for Point Commands. The selected point
appears
blue in the diagram.
Figure 7-8. Highlighted point in point list.
Use ‘Edit Point’ to change selected point coordinates.
Figure 7-9. Edit Point.
Use ‘Move Up’ and ‘Move Down’ to move selected point up or down on the
Point List. The sequence of the point list is the order in which locations will be
measured.
‘Delete Point’ removes the selected point from the Point List. ‘Delete All’
removes all points from the Point List.