INVT GD200-037G/045P-4, Operation Manual

Page: 104 / 266

Goodrive200 inverters Function codes
103
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
value When the counter achieves a fixed number, the
multi-function output terminals will output the
signal of “fixed counting number arrival” and the
counter go on working; when the counter
achieves a setting number, the multi-function
output terminals will output the signal of “setting
counting number arrival”, the counter will clear all
numbers and stop to recount before the next
pulse.
The setting counting value P08.26 should be no
more than the setting counting value P08.25.
The function is illustrated as below:
Setting range of P08.25:P08.26~65535
Setting range of P08.26:0~P08.25
P08.26
Reference
counting
value
0
○
P08.27
Set
running
time
Pre-set running time of the inverter. When the
accumulative running time achieves the set time,
the multi-function digital output terminals will
output the signal of “running time arrival”.
Setting range:0~65535 min
0m
○
P08.28
Fault reset
times
The time of the fault reset: set the fault reset time
by selecting this function. If the reset time
exceeds this set value, the inverter will stop for
the fault and wait to be repaired.
The interval time of the fault reset: The interval
between the time when the fault occurs and the
time when the reset action occurs.
Setting range of P08.28:0~10
0
○
P08.29
Interval
time of
automatic
fault reset
1.0s
○