manualshive.com logo in svg

Intel GSU31, User Manual

Share
Download
Intel GSU31 User Manual Download Page 97

Intel® Integrated RAID Controller GSU31 User’s Manual

 

Rev 1.0

2-77

Advanced Installation Steps

2.5.11

Setup and Installation for UnixWare*

2.5.11.1

In this Section

•

RAID Requirements for UnixWare

•

Installing UnixWare on a RAID Volume or Pass-Through Disk

•

Installing UnixWare on an IDE Disk or Non-RAID SCSI Disk

•

Install GSU31 on an Existing UnixWare Server

•

Uninstalling GSU31 from UnixWare

2.5.11.2

RAID Requirements for UnixWare

When installing GSU31 for UnixWare 7.1, note the following system requirements. 

RAID Hardware Requirements

•

Server with CD-ROM Drive not attached to GSU31

•

One available PCI slot (32bit, 33MHz recommended)

•

Monitor display resolution of 800 x 600 or higher (recommended)

•

GSU31 Adapter Card

•

PCI 2.2 Compliant System BIOS

RAID Software Requirements

•

GSU31 CD-ROM

•

Hard disk space: minimum 20 MB

•

UnixWare Installation Diskette (to create this diskette, see 

Chapter 3, “Exploring the 

Utilities”

)

•

SCO UnixWare 7.1 software with Netscape 4.08 or greater (included with SCO)

†

† 

Not supplied with GSU31.

Have all required system hardware and software components available before proceeding with the 
setup and installation.

Warning:

Do not install OSM(s) downloaded from OS vendor websites. The OSMs provided on the GSU31 
CD-ROM are a later version than the OSMs currently provided by OS vendors. Using OSMs other 
than those provided on the GSU31 CD-ROM may cause unpredictable results.

           

Summary of Contents for GSU31




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands