manualshive.com logo in svg

Intel GSU31, User Manual

Share
Download
Intel GSU31 User Manual Download Page 88

2-68

Intel® Integrated RAID Controller GSU31 User’s Manual

 

Rev 1.0

Advanced Installation Steps

2.5.10

Setup and Installation for Novell NetWare*

2.5.10.1

In this Section

•

RAID Requirements for Novell NetWare

•

Installing Novell NetWare on a RAID Volume or Pass-Through Disk

•

Installing Novell NetWare on an IDE Disk or Non-RAID SCSI Disk

•

Installing GSU31 on an Existing Novell NetWare Server

•

Uninstalling GSU31 from NetWare

2.5.10.2

RAID Requirements for Novell NetWare

When installing the GSU31 Kit for Novell NetWare, note the following system requirements.

RAID Hardware Requirements

•

Server with CD-ROM Drive not attached to GSU31

•

One available PCI slot (32bit, 33MHz recommended)

•

Monitor display resolution of 800 x 600 or higher (recommended)

•

GSU31 Adapter Card

•

PCI 2.2 Compliant System BIOS

RAID Software Requirements

•

GSU31 CD-ROM

•

Hard disk space: minimum 4 MB

•

MS-DOS 5.x or later (Required for new installations of NetWare 4.x only)

•

GSU31 NetWare Installation Diskette (If you do not have an OS Installation Driver Diskette 
and you wish to create one, see the 

Chapter 3, “Exploring the Utilities”

.)

•

Novell NetWare 4.2 - use Support Pack 8a or higher

†

•

Novell NetWare 5.0 - use Support Pack 4 or higher

†

† 

Not supplied with GSU31

Have all required system hardware and software components available before proceeding with the 
setup and installation.

Warning:

Do not install OSM(s) downloaded from OS vendor websites. The OSMs provided on the GSU31 
CD-ROM are a later version than the OSMs currently provided by OS vendors. Using OSMs other 
than those provided on the GSU31 CD-ROM may cause unpredictable results.

           

Summary of Contents for GSU31




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands