Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
2-41
Advanced Installation Steps
b. After the NT installation is complete, install the following components and software:
— Microsoft Windows NT 4.0 Service Pack 5 or greater
— Microsoft Internet Explorer 4.00 or greater
5. Install the GSU31 software (run the GSU31 setup) using the GSU31 CD-ROM.
Note:
You must have administrative level permissions to install GSU31 software. This
procedure assumes that the GSU31 hardware and Windows NT server are installed and
operational in your system.
a. Insert the GSU31 CD-ROM in the CD-ROM drive. If the Software Installation Main
Menu does not appear, then run the setup.exe file that resides at:
<CD-ROM root>\os_setup\winnt\setup.exe on the CD-ROM.
b. Click on the Setup button. See
.
Figure 2-35. Intel® Integrated RAID Software Installer Main Menu
The three components in the window in
are preselected. Click Next and
follow the on screen prompts to complete the installation.
Note:
The DMI and SNMP components are not selected by default. Refer to section
“Intel® Integrated RAID Software Component Installation” on page 4-3
of the
chapter for information on DMI and SNMP installation.
A progress bar appears that measures the progress of the GSU31 software setup. When
this screen completes, you have completed the GSU31 setup.
Note:
Refer to section
“Intel® Integrated RAID Software Component Installation” on
of the
chapter for information on HP Openview
and RAID Monitor.
6. See
chapter to customize your RAID volumes
using Storage Console.
