2-74
Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
Advanced Installation Steps
9. Continue with the NetWare installation as normal by following the screen prompts. Select the
Block Storage OSM when prompted.
10. Remove the NetWare CD-ROM from the CD-ROM drive and reboot the server and install
Support Pack 4 or higher. Once the server installation is completed, reboot the server.
11. Install the GSU31 software (run the GSU31 software setup).
12. Run "NWCONFIG".
13. Select "Product Options", then "Install product not listed". It will tell you that it is going to
scan the A: drive for installation scripts. Ensure the "NetWare Installation" diskette is in the
floppy drive, hit <Enter> to continue.
14. A screen prompt will ask which components you wish to install. Select the following
components and hit <F10> to continue.
BKSTROSM.HAM
SCSIOSM.HAM
HTTP and Winsock Services
RAID Management Agents
The appropriate files are copied and the AUTOEXEC.NCF and STARTUP.NCF files are
modified as necessary.
15. After the installation is complete, reboot the server to load the new drivers.
16. See
chapter to customize your RAID volumes
using Storage Console.
