2-46
Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
Advanced Installation Steps
2.5.6
Setup and Installation for Microsoft Windows NT* Server
4.0
2.5.6.1
In this Section
•
RAID Requirements for Microsoft Windows NT Server 4.0
•
Installing Microsoft Windows NT Server 4.0 on an Intel® Integrated RAID Volume or Pass-
Through Disk
•
Installing Microsoft Windows NT Server 4.0 on an IDE Disk or Non-RAID SCSI Disk
•
Install GSU31 into an Existing NT 4.0 System
2.5.6.2
RAID Requirements for Microsoft Windows NT Server 4.0
Note:
This document, when referring to NT Server 4.0, also applies to the following Windows NT 4.0
Server subtypes:
•
Microsoft Windows NT Server 4.0 Enterprise Edition
When installing the GSU31 kit for Microsoft Windows NT Server, note the following system
requirements.
Have all required system hardware and software components available before proceeding with the
setup and installation.
RAID Hardware Requirements
•
Server with CD-ROM Drive not attached to GSU31
•
One available PCI slot (32bit, 33MHz recommended)
•
Monitor display resolution of 800 x 600 or higher (recommended)
•
GSU31 Adapter Card
•
PCI 2.2 Compliant System BIOS
RAID Software Requirements
•
GSU31 CD-ROM
•
Hard Disk Space: 9 MB Minimum
•
Windows NT Installation Diskette (Microsoft Windows NT SCSI Miniport Diskette). See
Chapter 3, “Exploring the Utilities”
to create this diskette.
•
Microsoft Windows NT Server 4.0
†
•
Microsoft Windows NT 4.0 Service Pack 5 or greater
†
•
Microsoft Internet Explorer 4.0 or greater or Netscape 4.08 or greater
†
Note:
Microsoft Internet Explorer can be downloaded from the Microsoft website (
www.microsoft.com
)
and is also included in the Microsoft Windows NT 4.0 Option Pack (available as web download or
CD).
†
Not supplied with GSU31.
Warning:
Do not install OSMs (Operating System Service Modules) downloaded from OS vendor websites.
An OSM is the operating system driver portion of the I
2
O split driver model. The OSMs provided
