Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
2-43
Advanced Installation Steps
2.5.4.5
Installing Microsoft Windows NT 4.0 on an IDE Disk or Non-RAID
SCSI Disk
This procedure installs Microsoft Windows NT 4.0 on an IDE disk or non-RAID SCSI disk. It is
typically used on a system where the operating system is on a disk not controlled by GSU31. Have
all hardware and software on hand. See system requirements in
.
GSU31 Hardware Installation
See
Section 1.4, Install the Adapter Card
for detailed hardware installation procedures.
Install necessary IDE or SCSI hardware (consult vendor documentation for details).
Intel Integrated RAID Software Installation
1. Install Microsoft Windows NT 4.0 to the desired boot device (IDE, SCSI).
2. After the NT installation is complete, install the following components and software:
— Microsoft Windows NT 4.0 Service Pack 5 or greater
— Microsoft Internet Explorer 4.00 or greater
3. Install the GSU31 software (run the GSU31 setup).
Note:
You must have administrative level permissions to install GSU31 software. This
procedure assumes that the GSU31 hardware and Windows NT are installed and operational in
your system.
a. Insert the GSU31 CD-ROM in the CD-ROM drive. If the Software Installation Main
Menu does not appear, then run the setup.exe file that resides at:
<CD-ROM root>\os_setup\winnt\setup.exe on the CD-ROM.
b. Click on the Setup button. See
. Follow the on-screen prompts to complete
installation.
The three components in the window in
are preselected. Add the remote
storage console component by clicking on the remote storage console box.
Note:
The DMI and SNMP components are not selected by default. Refer to section
Section 4.2, Intel® Integrated RAID Software Component Installation
for information on
DMI and SNMP installation.
A progress bar appears that measures the progress of the GSU31 setup. When this screen
completes, you have completed the GSU31 setup.
Note:
Refer to section
“Intel® Integrated RAID Software Component Installation” on
of the
chapter for information on HP Openview
and RAID Monitor.
4. See
Section 4.3, “Configuring RAID Volumes Using the Intel® Integrated RAID
to customize your RAID volumes using Storage Console.
