manualshive.com logo in svg

Intel GSU31, User Manual

Share
Download
Intel GSU31 User Manual Download Page 120

4-4

Intel® Integrated RAID Controller GSU31 User’s Manual

 

Rev 1.0

Using the Storage Console

Creates a syslog in /usr/adm/syslog that can be configured send an administrative email upon 
detecting an event.

4.2.1.2

Using RAID Monitor with Windows 2000

The RAID Monitor service for Windows 2000 provides local console alerts and registers Event 
Viewer entries for many events associated with the GSU31. It has no user configurable options.

4.2.1.3

Using RAID Monitor with NT 

RAID Monitor Application

RAID Monitor provides a user interface to configure and enable/disable the 

RAID

 Monitor 

Service. Run the RAID Monitor Application every time the server starts by creating a short cut to it 
in the Startup program group. The 

RAID

 Monitor Application is configured using the RAID 

Monitor Application Configuration Dialog. 

RAID Monitor Service

The RAID Monitor Service is a Win32 service which monitors the status of 

RAID

 volumes. The 

RAID

 Monitor Service runs in the background and has no interface. 

Configuring the RAID Monitor

When the 

RAID

 Monitor application is loaded, it creates an icon in the system tray. When users 

click the right mouse button on the icon, a configuration menu appears. The configuration menu is 
described below.

Configuration Menu 

The following are the components of the configuration menu.

•

Properties. Displays the RAID Monitor Application Configuration Dialog (see 

Figure 4-2

).

•

Enable/disable the RAID Monitor Service. When disabled, RAID Monitor Service does not 
send events to a local monitor. 

•

Exit the RAID Monitor Application.

RAID Monitor Application Configuration Dialog

Use the RAID Monitor Application Configuration Dialog to configure the RAID Monitor. See 

Figure 4-2

. 

Note:

The RAID Monitor Application Configuration Dialog can be invoked by double clicking on the 
system tray icon.

The components of the RAID Monitor Application Configuration Dialog are discussed below. 
Refer to 

Figure 4-2

.

•

Enter the path and filename of the HTML browser. 

•

Adjust the 

RAID

 Monitor Service polling interval or frequency. The polling interval 

determines how frequently the 

RAID

 Monitor Service checks the status of disks and RAID 

volumes. Use the slider bar to adjust the polling interval. The default polling interval is five 
seconds. One tick in the slider bar increments/decrements the polling interval by five seconds. 
Whenever a RAID volume causes an event, the RAID Monitor Service sends a notification to 
the registered applications. 

           

Summary of Contents for GSU31




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands