Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
2-45
Advanced Installation Steps
2.5.5
Overview of Setup and Installation for Remote
Administration of NT Server
Note:
This chapter is not applicable for the Workstation OS.
This chapter describes the installation procedures for GSU31. These procedures include hardware
installation, the creation and configuration of a RAID volume, OS installation and the installation
of the GSU31 software on servers requiring the ability to be remotely managed.
illustrates the typical uses for this product.
Figure 2-37. Remote Administration for NT Server
Figure 2-38. Installing the Operating System on an GSU31 RAID Volume, a Pass-through Disk/
IDE or Installing GSU31 into a System with an Existing Operating System
A
B
A
B
C
C
D
D
Remote Servers
Workstation Remotely Administering Servers
Gather Required
Software and
Hardware
Install
Adapter Card
Create Bootable
RAID Volume or
Pass-Through
Using RCU
Install OS on a RAID
Volume or
Pass-Through
Disk
Run
RAID Software
Setup
Begin
Installation of
OS on a
RAID Volume or
Pass-Through
Disk
Gather Required
Software and
Hardware
Install
Adapter Card
Install OS on a
non-RAID Storage
Device
Run
RAID Software
Setup
Begin
Installation of
OS on non-RAID
Storage
Device
Gather Required
Hardware
and
Software
Install
Adapter Card
Run
RAID Software
Setup
Begin
Installation
RAID Adapter
into a System
with an
Existing OS
Create OS
Installation
Driver Diskette
