Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
4-33
Using the Storage Console
iop://localhost/0/8/0
To configure the second GSU31 (change first “0” to a “1”) use:
iop://localhost/1/8/0
The Storage Console functions in the same way as with one card, except that only the devices that
are attached to it can be configured.
Remote Administration for all OSs
Note:
Not applicable for 2000 Professional or NT Workstation.
Default setting (the first parameter indicates the IOP #)
http://localhost/scripts/iop.exe/0/8/0
Note:
The “/0” parameter directly after “iop.exe” indicating the first IOP is being configured. To switch
from the first adapter to the second simply change the first parameter from “0” to “1” to indicate
that you wish to configure the second GSU31. See the example below:
To configure the fist GSU31 (default) use:
http://localhost/scripts/iop.exe/0/8/0
To configure the second GSU31 (change first “0” to a “1”) use:
http://localhost/scripts/iop.exe/1/8/0
The Storage Console functions in the same way as with one card, except that only the devices that
are attached to it can be configured.
