Intel GSU31 User Manual Download Page 117

Page: 117 / 195

Intel® Integrated RAID Controller GSU31 User’s Manual

Rev 1.0

4-1

Using the Storage Console

4.1

Intel® Integrated RAID Software Suite

4.1.1

Summary of Contents

•

Intel® Integrated RAID Software Component Installation

—

RAID Monitor

—

Using Intel Server Control (ISC) to Monitor RAID Events

—

HP OpenView* Network Node Manager Integration

•

Configuring RAID Volumes Using the Intel® Integrated RAID Storage Console

—

Launching the Intel® Integrated RAID Storage Console for Local Administration

—

Launching the Intel® Integrated RAID Storage Console for Remote Administration

—

Intel® Integrated RAID Storage Console

—

—

—

—

—

—

Management Utilities (including Storage Console)

4.1.2

Introduction

The Intel Integrated RAID Software Suite refers to Intel Integrated RAID software on the CD-
ROM delivered with your system. This CD-ROM contains installation software that is required for
the configuration and support of Intel Integrated RAID.

Table 4-1

outlines their functions.

Summary of Contents for GSU31




































































































































































































Search results

Summary of Contents for GSU31

Reviews:

Brands by name

Popular brands

Intel GSU31, User Manual

Search results

Summary of Contents for GSU31

Reviews:

Brands by name

Popular brands