Intel GSU31 User Manual Download Page 118

Page: 118 / 195

4-2

Intel® Integrated RAID Controller GSU31 User’s Manual

Rev 1.0

Using the Storage Console

Table 4-1. Intel® Integrated RAID Software

Software

Use

Function

-I

RAID Configuration
Utility (BIOS)

RAID

Configuration

Configures a RAID volume (prior to boot up during BIOS
initialization).

•

Configure, delete or display information about a RAID
Volume.

•

Reset the configuration of the Intel® Integrated RAID
hardware.

•

Define a global hot spare.

-Sp

ifi

Advanced RAID
Configuration Utility
(ROM-DOS)

RAID

Configuration

Configures Multiple RAID volumes (ROM DOS).

•

Configure, delete or display information about a RAID
Volume.

•

Reset the configuration of the Intel Integrated RAID
hardware.

•

Define a global hot spare.

RAID Monitor

Monitor and

report state

changes of Intel

Integrated RAID

The RAID Monitor consists of two software components:

•

RAID Monitor Application

•

RAID Monitor Service

HP OpenView
Network Node
Manager

Network

Management

Integrates the management of Intel Integrated RAID
devices into the OpenView framework.

Storage Console

RAID

Configuration

Configures a RAID volume using your browser.

•

Configure, delete or display information about a RAID
Volume.

•

Reset the configuration of the Intel Integrated RAID
hardware.

•

Define a global hot spare.

•

Perform a bus scan.

1. Software tools that do not require a network operation system to run.
2. Software tools that do require a network operation system to run.

Summary of Contents for GSU31




































































































































































































Search results

Summary of Contents for GSU31

Reviews:

Brands by name

Popular brands

Intel GSU31, User Manual

Search results

Summary of Contents for GSU31

Reviews:

Brands by name

Popular brands