2-38
Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
Advanced Installation Steps
Figure 2-34. Installing the Operating System on an GSU31 RAID Volume, a Pass-through Disk
or other Storage Device or Installing GSU31 into a System with an Existing
Operating System
2.5.4
Setup and Installation for Local Administration of Microsoft
Windows NT* 4.0
2.5.4.1
In this Section
•
RAID Requirements for Microsoft Windows NT 4.0
•
Installing Microsoft Windows NT 4.0 on an Intel® Integrated RAID Volume or Pass-Through
Disk
•
Installing Microsoft Windows NT 4.0 on an IDE Disk or Non-RAID SCSI Disk
•
Install GSU31 on an Existing NT 4.0 Operating System
2.5.4.2
RAID Requirements for Microsoft Windows NT 4.0
Note:
This document, when referring NT 4.0, also applies to the following Windows NT 4.0 operating
systems:
•
Windows NT 4.0 Server
•
Windows NT 4.0 Server Enterprise Edition
•
Windows NT 4.0 Workstation
When installing the GSU31 kit for Microsoft Windows NT, note the following system
requirements.
Have all required system hardware and software components available before proceeding with the
setup and installation.
Gather Required
Software and
Hardware
Install
Adapter Card
Create Bootable
RAID Volume or
Pass-Through
Using RCU
Install OS on a RAID
Volume or
Pass-Through
Disk
Run
RAID Software
Setup
Begin
Installation of
OS on a
RAID Volume or
Pass-Through
Disk
Gather Required
Software and
Hardware
Install
Adapter Card
Install OS on a
non-RAID Storage
Device
Run
RAID Software
Setup
Begin
Installation of
OS on non-RAID
Storage
Device
Gather Required
Hardware
and
Software
Install
Adapter Card
Run
RAID Software
Setup
Begin
Installation
RAID Adapter
into a System
with an
Existing OS
Create OS
Installation
Driver Diskette
