![Intel GSU31 User Manual Download Page 16](http://html1.mh-extra.com/html/intel/gsu31/gsu31_user-manual_2072234016.webp)
1-8
Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
Quick Start Instructions
a. When the Install Hardware Device Drivers window (see
) launches for the
Generic I
2
O Disk, click Next to continue the installation.
b. Uncheck the Floppy Disk and CD-ROM Drives boxes and check the Specify Location box
and continue.
.
c. Type in the following path for the location of the drivers: C:\Program Files\RAID
Software Suite\Drivers, click OK to continue. Restart the computer when finished.
d. Installation of your GSU31 is now complete. Refer to subsequent chapters in this user’s
manual for additional information.
1.7.2
Setup and Installation for Novell NetWare*
1.7.2.1
Software Requirements
•
GSU31 CD-ROM
•
Hard disk space: minimum 4 MB
•
MS-DOS* 5.x or later (Novell 4.2 only)
•
GSU31 NetWare Installation Diskette (created in
)
•
Novell NetWare 4.2 with Service Pack 8a or higher or Novell NetWare 5.0 with Service Pack
4 or higher†
†
Not supplied
1.7.2.2
Installing Novell NetWare on a RAID Volume
There are two procedures listed below, one for NetWare 4.2 and another for NetWare 5.0. Please
follow the instructions for the version you wish to install.
NetWare 4.2
1. Insert the NetWare Installation CD-ROM, reboot the server, go to the appropriate drive letter
and start the NetWare 4.2 installation.
2. When the device driver installation screen appears, Select additional or modify selected Disk/
LAN drivers.
3. Choose Select an additional driver. Hit Insert to install an unlisted driver. Ensure that the
GSU31 NetWare Installation diskette (created in
) is in the floppy drive and hit
Enter. Select
BKSTROSM.HAM
from the list.
4. Continue with the NetWare installation as normal by following the screen prompts.
5. Once the server installation is finished, complete the installation of the Intel Integrated RAID
software suite by following the steps below.
6. Run LOAD INSTALL.
7. Select Product Options, then Install product not listed. It will tell you that it is going to scan
the A: drive for installation scripts. Ensure the GSU31 NetWare Installation diskette is in the
floppy drive, hit Enter to continue.