General description
User Manual H12 / SCAMAX® 8x1 - Version 2019.12
2.1.
SCAMAX® upgrade concept 801/811/821
The H12 scanner type supports the flexible upgrade system developed by InoTec GmbH. Through
this the document scanner can be optimally adapted to changing production volumes by upgrading
the scanning speed.
By specifying time limits, also providing temporary upgrades to carry out tests or to intercept occur-
ring performance peaks is possible.
The middle number in the model name stands for the enabled speed level. The model
801
thus
constitutes the basic model with a throughput of up to
160 pages per minute (ppm),
while the
model
811,
the average speed maximum
220 ppm
and the model
821
provides the highest speed
of maximum
300 ppm.
All speed information relating to the scanning of A4 documents in landscape mode with a resolution
of 200 or 300 dpi.
Additional models and special editions with a different configuration are possible.
2.2.
Extensions/options
Similar to the speed, the H12 scanner type can optionally be extended in other areas. The previously
known or planned extensions are listed below.
2.2.1.
Dual Input Hopper
In order to enable continuous processing and thereby increase the efficiency of the scanning work-
station, a Dual Input Hopper (s
ee chapter
) can be used instead of a Single Input Hopper. This
has two adjacent Input Trays with a capacity of 1,000 sheets each, which are alternately executed. In
order for the scan operator to have the option to fill the empty Input Tray with documents, without
having to interrupt the scanning process. The project-based configuration ability and the use of these
Dual Input Hopper is described in chapter
2.2.2.
HighSpeed Stacker Arm
Since paper develops its own momentum during transport at high speed, a special stacking arm was
developed for handling the Highspeed Output Mode, which not only specifically intercepts ejected
sheets, but also controls the lowering of the output tray and registers jams during the output to ensure
an optimized and as trouble-free as possible paper output. Since it features integral speed manage-
ment, the same HighSpeed Stacker Arm can be used with all three scanner models.
2.2.3.
2nd Output Hopper
To reflect on the benefits of the aforementioned Dual Input Hopper also in the output area, the H12
type can be equipped with a 2nd Output Hopper (
see chapter
). The project-based configuration
possibility and the use of this second shelf is described in the chapters
and
2.2.4.
Imprinter HD
The two imprinters supplied in standard configurations (
Kapitel
) may be replaced with an optio-
nal HD variant. Apart from offering three different print quality settings, HD imprinters are capable of
printing up to four lines simultaneously, in varying font sizes. Also, they can produce bar codes based
on three different bar code types. For more information, please refer to chapter
