InoTec SCAMAX H12, User Manual

Page: 118 / 136

Disruptions User Manual H12 / SCAMAX® 8x1 - Version 2019.12
Page 118 of 136
9.1.7. (2nd) Output Tray Full
(Warning 109/110)
These warnings mean that the Output Tray of the Out-
put Hopper or the 2nd Output Hopper has reached its
maximum tray height ( see chapter 5.7. ). To eliminate the
warning, the documents must be removed from the con-
cerning Output Tray. Trying to start a scan process in this
state, leads to a similar error message ( see chapter 9.2.6. ).
9.1.8. Base Cover Opened
(Warning 111)
This warning appears initially only in the status area,
pointing out that the Base Cover is not properly closed.
To eliminate the warning, it must be checked whether the
Base Cover is installed properly ( see chapter 6.5. ).Trying
to start a scan process in this state, leads to a similar error
message ( see chapter 9.2.24. ).
9.1.9. Cover Output Hopper (Top) Opened
(Warning 112/113)
These warnings appear initially only in the status area
and point out that the Cover Output Hopper or 2nd
Output Hopper is not properly closed. To eliminate the
respective warning, it must be checked whether the
appropriate Cover is installed properly ( see chapter 6.3. ).
Trying to start a scan process in this state, leads to a
similar error message ( see chapter 9.2.25. ).
9.1.10. Changing Straight Through Paper Path
(Warning 114)
These warnings appear as long as the "Straight Through
Paper Path Elevation" option ( see chapter 4.6.3.1.2. ) is en-
abled or disabled, as the raising or lowering of the Scan
Plane lasts a few seconds. A scanning process cannot be
started during this process.
9.1.11. Test Scan Mode is active
(Warning 125)
This warning is initially displayed in the status area
and indicates that TestScan mode has been entered.
TestScan mode may be initiated and cancelled using the
TestScan function button ( see chapter 4.6.1.3. ). For as long
as TestScan mode is active, a connection to an external
scan software cannot be established.