Cleaning and Maintenance
User Manual H12 / SCAMAX® 8x1 - Version 2019.12
7.
Cleaning and Maintenance
To achieve an optimum image quality and avoid excessive wear, it is important to keep the scanner
free of dust and dirt.
The exterior of the scanner must be cleaned only with a lint-free cloth and clear water. To remove
paper dust inside the scanner only proven dust brush or soft cloth should be used. At regular inter-
vals dust and smaller particles
(bits of paper, staples)
should be vacuum-cleaned from the lower part
of the scanner. A special vacuum cleaner is available under Order No:
s 910 0020
.
7.1.
Cleaning Accessory
To be able to carry out the cleaning activities described
in the following chapters, the devices of the H12 type are
delivered with a Cleaning Accessory Set.
It is part of the Accessory Set H12 (
see chapter
contains the most important utensils necessary for the
maintenance of the scanner. If you want to order indi-
vidual parts of the Cleaning Accessory Set, enter the
corresponding order number from the content list of the
Accessory Set H12.
The whipers are also available in a larger packaging unit under the following name:
•
Whipers, white (20 pcs.) ..............................................................................................e 901 0000
With the included tweezers stuck scraps of paper, staples, or the like can easily be removed from
hardly accessible positions
CAUTION
The use of compressed air to remove dust and hung-up paper scraps by "blasting" is strongly
discouraged because the turbulence of particles cannot be controlled and therefore metal
parts such as staples or the like, can come to rest on circuit boards or electrical connections.
This can lead to damage of components and failure of the scanner.
Damages of such origin
are not subject to warranty!
