Capacitive Touchscreen
User Manual H12 / SCAMAX® 8x1 - Version 2019.12
will appear. All function
keys below the quick-ac-
cess bar will highligh-
ted in green and the
Remove QA
button will
become active .
You may now re-assign
any of the Quick-Access
buttons by touching and
then dragging the desi-
red function key onto
one of the four quick-ac-
cess positions. As soon
as you have selected one
of the function keys, the
green highlighting will
move to the Quick-Access buttons, identifying them as targets. When dragging a function key across,
the function key’s icon will be displayed next to your fingertip. Releasing a function key over one of
the quick-access positions will replace and update that button’s assignment, accordingly. Dragging
the
Remove QA
button onto one of the quick-access positions will remove any assignment from that
position, leaving it empty and without function. Tapping the
End Edit
button will end the modification
mode.
Any new key assignments will remain in effect until a different scanning profile is selected or until the
scanning software is stopped or restarted. If an internal Scan Profile is used, then all new key assign-
ments will be stored in the
General
section of the current Scan Profile (
see chapter
).
4.3.2.
Job and Profile Selection
If the internal scan client is used, a pre-de-
fined Scan Job
(see chapter
) and the
desired Scan Profile
(see chapter
) are to
be selected in the navigation bar.
If the scanner is controlled by a scanning
software on a connected PC, all the neces-
sary settings are transmitted to the scan-
ner via the used driver interface. In the
Scan screen, the term
Remote
appears in
the navigation bar beside the item
Scan Processing
instead of the job and profile selection and
the navigation bar is completely grayed out. Since external scan-software can also utilize scan-
ner-internal profiles (
see chapter
), the term
Remote
may occasionally be replaced by the name of
an internal scanner profile.
