IBM eServer xSeries 345 Type 8670, Maintenance Manual

Page: 116 / 176

Note: See “System” on page 116 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
00180200
(No more I/O space available for PCI
adapter)
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
00180300
(No more memory (above 1MB for PCI
adapter))
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
00180400
(No more memory (below 1MB for PCI
adapter))
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1.
3. Failing adapter.
4. System board.
00180500
(PCI option ROM checksum error)
1. Remove failing PCI card.
2. System board.
00180600
(PCI to PCI bridge error)
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1.
3. Failing adapter.
4. System board
00180700, 00180800
(General PCI error)
1. System board
2. PCI card
00181000
(PCI error)
v Adapter
v System board
01295085
(ECC checking hardware test error)
1. System board
2. Microprocessor
01298001
(No update data for microprocessor 1)
1. Ensure all processors have the same cache size.
2. Microprocessor 1.
01298002
(No update data for microprocessor 2)
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 2.
01298101
(Bad update data for microprocessor 1)
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 1.
01298102
(Bad update data for microprocessor 2)
1. Ensure all processors have the same cache sizes, dock speeds
and clock frequencies.
2. Microprocessor 2.
I9990301
(Hard disk sector error)
1. Hard disk drive
2. SCSI backplane
3. Cable
4. System board
I9990305
(Hard disk sector error, no operating
system installed)
v Install operating system to hard disk.
106
xSeries 345 Type 8670: Hardware Maintenance Manual and Troubleshooting Guide