IBM BladeCenter S SAS RAID Controller Module, Installation And User Manual

Page: 82 / 216

v
When
pool
is the selected object, you can set the
–oknonviable
option while
mounting a nonviable pool.
v
If the
–reportonly
option is specified while dismounting an enclosure, only the
affected LUNs are reported without actually dismounting the enclosures.
v
If you do not specify the
–okdegraded
option while dismounting an enclosure
that might result in degraded groups, the command will fail.
Examples:
<CLI> mountstate -getobject -drive
_____________________________________________
| Drive# | E:T | State |
|________|____________|_______________________|
|
0| 1:4| Online|
| 1| 2:3| Online|
| 2| 1:6| Online|
| 3| 1:2| Online|
| 4| 1:1| Online|
| 5| 2:6| Online|
| 6| 2:2| Online|
| 7| 2:4| Online|
| 8| 1:3| Online|
| 9| 2:5| Online|
| 10| 2:1| Online|
|________|____________|_______________________|
<CLI> mountstate -getobject -mediatray
No trays reported
<CLI> mountstate -getobject -enclosure
_____________________________________
| Enclosure# | State |
|_____________|_______________________|
|
0| Online|
| 1| Online|
| 2| Online|
|_____________|_______________________|
<CLI> mountstate -getobject -bbu
_____________________________________
| CtlrId# | Battery State |
|_____________|_______________________|
|
Ctlr 0| Service|
| Ctlr 1| Service|
|_____________|_______________________|
<CLI> mountstate -setobject -dismount -drive 1:1
<CLI> mountstate -setobject -mount -drive 1:1
Note: If a pool has been dismounted, is offline, or in service mode, mounting one
or more of the drives will not restore the pool. A dual controller reboot is required
to bring the pool back online.
<CLI> mountstate -setobject -dismount -pool my_pool
72
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module