IBM BladeCenter S SAS RAID Controller Module, Installation And User Manual

Page: 80 / 216

local list of objects. If you issue the
–setobject
option with the
-number
option
while the list is empty, an error generates.
Use the
-number
option only after you have issued the
–getobject
option, which
builds a local list of objects.
Command arguments:
<CLI> locate [ -off ] | [ -getobject -[drive | pool | volume | ctlr | bbu | enclosure ] ] |
[-setobject [ -drive [ E:T | all]
| -pool poolname | -volume pool:volume | -ctlr [0|1] |
-bbu [0|1] | -tray traylocation | -enclosure [0|1|2] | -number object] ]
Where:
v [E:T|all]
- Locates a specific drive by name when issued with
–drive E:T
.
Locates all drives when issued with
–drive all
.
v poolname
- Locates a pool by its name when issued with
-pool poolname
.
v pool:volume
- Locates drives belonging to a volume by its name when issued
with
-volume pool:volume
.
v [0|1]
- Locates a controller and Battery Backup Unit by their number.
v [0|1|2]
- Locates a enclosure by its number.
v object - Allows selection of the number displayed in the list output.
Examples:
<CLI> locate –off
<CLI> locate –getobject –volume
vol# VolumeName Cap RaidType Status
0 pool1:vol1 4GB 0 Viable
1 pool1:vol2 2GB 0 Viable
<CLI> locate –setobject –pool group1
<CLI> locate –setobject –drive 0:6
<CLI> locate –setobject –bbu 0
<CLI> locate –setobject –ctlr 1
<CLI> locate –setobject –enclosure 0
<CLI> locate –setobject –volume pool1:volume1
<CLI> locate –setobject –drive all
<CLI> locate –setobject –pool group1
<CLI> locate –setobject –drive 0:6
<CLI> locate –setobject –bbu 0
<CLI> locate –setobject –ctlr 1
<CLI> locate –setobject –enclosure 0
<CLI> locate –setobject –volume pool1:volume1
<CLI> locate –setobject –drive all
<CLI> locate –getobject –volume
Vol# VolName# GrpName# Capacity# HostLUN# Host-WWN
0 testVol0 Grp1 1024 0 23abcd
1 testVol1 Grp2 3590 0 abdef3
<CLI> locate –setobject –number 2
70
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module