4.
At the
<CLI>
prompt, enter
mountstate -setobject -dismount -mediatray 0
and press Enter to prepare the media tray for service.
<CLI> mountstate -setobject -dismount -mediatray 0
Current Machine Local Time: 02/18/2010
09:47:01 PM
Set MediaTray MountState successful
5.
At the
<CLI>
prompt, enter
mountstate -getobject –mediatray
and press
Enter to query the mount state. Verify the media tray is in the SERVICE state.
<CLI> mountstate -getobject -mediatray
________________________________
| Tray#
|
State
|
|________|_______________________|
|
0|
Service|
|________|_______________________|
6.
At the
<CLI>
prompt, enter
alert -get
and press Enter to query the active
alert list. Verify alerts 2200 and 2005 are in the active alert list.
<CLI> alert -get
Existing Alerts :
____________________________________________________________________________________
|AlertCode| Id |
Time
|SlotID| Severity |
WWN
| Ackable |MaskState|
|====================================================================================|
|
2200
| 242|20100218214701|
0 |
Info |5005076b07441aff|
0 | Unmasked|
|------------------------------------------------------------------------------------|
| Msg: Battery (Serial #Y1Y01078M24T) ready for service
|
|====================================================================================|
|
2005 | 243|20100218214701|
0 |
Info |5005076b07441aff|
0 | Unmasked|
|------------------------------------------------------------------------------------|
| Msg: Dismounted media tray ready to remove
|
|====================================================================================|
|
2200 | 243|20100218214701|
1 |
Info |5005076b07441aff|
0 | Unmasked|
|------------------------------------------------------------------------------------|
| Msg: Battery (Serial #Y1Y0107BL09M) ready for service
|
|====================================================================================|
7.
Remove the media tray from the chassis.
a.
Open the release handles (rotate the top handle up and the bottom handle
down) to disengage the media tray from the IBM BladeCenter S chassis.
b.
Slide the media tray out of the IBM BladeCenter S chassis.
Note:
When you remove the media tray, the fan modules begin to run at
full speed.
c.
If you are instructed to return the media tray or DVD drive, follow all
packaging instructions, and use any packaging materials for shipping that
are supplied to you.
8.
Remove each Battery Backup Unit from the media tray.
a.
Open the release handle (rotate the handle down).
b.
Slide the Battery Backup Unit out of the media tray.
9.
At the
<CLI>
prompt, enter
alert -get
and press Enter to query the active
alert list. Verify alert 0006 is in the active alert list. This alert is automatically
removed from the active alert list after two minutes.
<CLI> alert -get
Existing Alerts :
_____________________________________________________________________________________
|AlertCode| Id
|
Time
|SlotID| Severity |
WWN
| Ackable |MaskState|
|=====================================================================================|
|
6 | 180 |20100219131844|
0 |
Info |5005076b07419fff|
1 |Unmasked |
176
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
Summary of Contents for BladeCenter S SAS RAID Controller Module
